![]() ![]() I successfully logged into the device, just to make sure it worked, while it was still an official PogoPlug. He did and I found out the address that was assigned to it. I had to write down the MAC address of the PogoPlug, go over to a system administrator and ask him to search the DHCP log files for that MAC address. There are hundreds of devices in the office. I’m in an office environment and don’t have access to the router. I’m installing the software on a second device as I type along. You login to your router, look at the list of attached devices and easily spot it. In a home environment, this is relatively easy (for the geeks among us). One of the steps that they don’t cover is discovering the IP address of your PogoPlug, so that you can SSH to it. The default password for a PogoPlug Pro is ceadmin (as noted, you can change it via the website, or once you log in, with the passwd command. Once you’ve enabled SSH on the device, you can set your own password. You will be able to reverse the process, returning the device to a full PogoPlug in the future, should you desire that, but it’s not a dual-boot situation where you decide which version you want it to be. This is required, even though we will shortly be disabling the service, since this is the only way to get SSH access to the device. You have to register your PogoPlug at my. I will repeat them here, so that anyone who doesn’t want to link off of this page can simply follow all the way through. I ended up formatting the drive while it was connected to a laptop running Linux, but all of the other instructions on that page worked. The first time I followed them, the formatting of my external drive failed. The instructions there are extremely clear. The specific ARM implementation has it’s own site, which is where I started my odyssey.Īfter reading the overview on that page, I clicked on the Installation tab. I chose Arch Linux because it was the most prominent one I found and because it has a very good reputation independent of the PogoPlug. There are a number of Linux distributions available for the PogoPlug Pro (an ARM-based device). Ankit used this guide to get CrashPlan running on his PogoPlug, then dug in a lot more than I did to solve the problems I described. Update: All sections marked Update: that apply to Java and udev were courtesy of Ankit Mohan. None of the credit goes to me, I’m just collecting the wisdom of others in one place, hopefully an easy one to find. Since it took me way longer to find the various pieces, let alone get them to work, than I felt it should have, I’m writing this (for myself, as well as for others who might give up more easily than I did). Since I was able to do this, successfully, the instructions can be found on the Net. Since we are often at other, very high-speed locations, I still believe that paying for the CrashPlan online backup service is the way to go (and gives me great comfort), but when I’m home, I wanted a local solution (that didn’t involve plugging in a hard drive to my laptop). In other words, not really a useful real-time backup solution. My primary reason for installing CrashPlan on this device is to compensate for the pathetic upload speed provided by Time Warner, all of 485Kbps, shared with my wife, for normal Internet use, VoIP calls and backups. You will be voiding your PogoPlug warranty and CrashPlan does not support this configuration of their Linux software. I wanted it to be my primary DLNA server.Ĭaution: none of what follows is supported by either company. To be slightly more accurate, I wanted the device to perform an additional function (beyond backups). To solve a number of my own problems (not caused by either service!), I decided to investigate marrying them (the PogoPlug device, with the CrashPlan software). I’ve had both for a while and think very highly of them. CrashPlan is an amazing piece of software (and also provides a fee-based amazing service). PogoPlug Pro is an amazing device (coupled with an amazing service). I will strike-through the parts that were replaced, so that you can safely ignore them if you’re going through this guide for the first time. ![]() Updates will be marked with End Update to allow for multi-paragraph updates. You can apply those instructions separately if you’ve already completed the rest of this installation. There are critical updates embedded in this post, added on, all preceded with Update. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |